一种抗干扰能力强的过载实时监控系统

为了实时监控运输车辆在道路行驶中产生振动的情况,研制了一套过载实时监控系统。本文论述了系统的工作原理和设计特点,详细给出了系统的硬件组成和软件流程圈。该系统用于亚洲一号卫星以及两颗“澳星”的密封容器运输车过载的实时监控,结果表明,系统均达到了预期的设计要求,具有工作稳定可靠,抗干扰能力强等特点。     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

柴油机排气集水箱降温特性及其影响因素

针对常规潜艇柴油机排气系统集水箱,分别建立了不同管束结构集水箱的数值模型,并得到了各自内部流场及温度场的分布;分析了细管长度、细管转折形式和布置形式对其冷却降温性能和阻力特性的影响。结果表明:内层管长L1大于外层管长L2的结构比等管长的结构排气阻力小,降温冷却效果更明显;细管末端的弯管与折管相比,排气阻力小,降温性能更优越。     

基于ACE Streams框架的舰船综合电子仿真系统设计

软件构件具有良好的功能封装性及接口规范性,在增强软件的可移植性和提高复用率等方面意义重大。在舰船综合电子仿真系统开发过程中,通过引入ACE Streams框架的技术,有效地降低了软件各层次间的耦合度,增强了数据的传输处理能力,固化了该系统的通信机制。     

A generic model of motor‐carrier fuel optimization

Fuel optimizers are decision models (software products) that are increasingly recognized as effective fuel management tools by U.S. truckload carriers. Using the latest price data of every truck stop, these models calculate the optimal fueling schedule for each route that indicates: (i) which truck stop(s) to use, and (ii) how much fuel to buy at the chosen truck stop(s) to minimize the refueling cost. In the current form, however, these models minimize only the fuel cost, and ignore or underestimate other costs that are affected by the models' decision variables. On the basis of the interviews with carrier managers, truck drivers, and fuel‐optimizer vendors, this article proposes a comprehensive model of motor‐carrier fuel optimization that considers all of the costs that are affected by the model's decision variables. Simulation results imply that the proposed model not only attains lower vehicle operating costs than the commercial fuel optimizers, but also gives solutions that are more desirable from the drivers' viewpoint. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Optimal outbound dispatch policies: Modeling inventory and cargo capacity

In this paper, we present an optimization model for coordinating inventory and transportation decisions at an outbound distribution warehouse that serves a group of customers located in a given market area. For the practical problems which motivated this paper, the warehouse is operated by a third party logistics provider. However, the models developed here may be applicable in a more general context where outbound distribution is managed by another supply chain member, e.g., a manufacturer. We consider the case where the aggregate demand of the market area is constant and known per period (e.g., per day). Under an immediate delivery policy, an outbound shipment is released each time a demand is realized (e.g., on a daily basis). On the other hand, if these shipments are consolidated over time, then larger (hence more economical) outbound freight quantities can be dispatched. In this case, the physical inventory requirements at the third party warehouse (TPW) are determined by the consolidated freight quantities. Thus, stock replenishment and outbound shipment release policies should be coordinated. By optimizing inventory and freight consolidation decisions simultaneously, we compute the parameters of an integrated inventory/outbound transportation policy. These parameters determine: (i) how often to dispatch a truck so that transportation scale economies are realized and timely delivery requirements are met, and (ii) how often, and in what quantities, the stock should be replenished at the TPW. We prove that the optimal shipment release timing policy is nonstationary, and we present algorithms for computing the policy parameters for both the uncapacitated and finite cargo capacity problems. The model presented in this study is considerably different from the existing inventory/transportation models in the literature. The classical inventory literature assumes that demands should be satisfied as they arrive so that outbound shipment costs are sunk costs, or else these costs are covered by the customer. Hence, the classical literature does not model outbound transportation costs. However, if a freight consolidation policy is in place then the outbound transportation costs can no longer be ignored in optimization. Relying on this observation, this paper models outbound transportation costs, freight consolidation decisions, and cargo capacity constraints explicitly. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 531–556, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10030     

低温推进剂供应管道系统充填过程的动力学模型

研究了低温推进剂液体火箭发动机供应管道系统充填过程的建模问题。低温推进剂的充填相变过程采用均相模型,对推进剂充填管道系统进行有限元分割,应用基本守恒定律于充满推进剂的单元和充满气体的单元,两相单元采用等效流容方程,建立了低温推进剂管道充填过程的有限元状态变量模型。充填的容腔视为两相单元,建立了其动力学模型。利用本文的模型,对液氢、液氧推进剂的管道充填过程进行了仿真计算,给出了有关计算结果。     

天然气管道输送工程消防设计及火灾预防对策

通过分析西气东输二线工程天然气管道输送过程的火灾危险性,从严格按规范要求进行消防设计、关键部位的火灾预防措施、检测及监控措施、消防安全管理等方面提出了消防安全防范对策。     

高黏油品热边界层减阻输转工艺及装置研究

油库高黏油品黏度大、凝固点高,在常温下管输水力损失大,必须加热升温降黏后才能实施管输、收发及灌桶作业.分析了黏油蒸汽加热的不利因素,研究了黏油热边界层减阻输转理论与工艺技术,开拓了热边界层理论与技术的应用领域.研制了基于热边界层减阻理论的黏液输转装置,建立了黏油热边界层减阻工艺水力和热力数学模型,并编制计算程序,通过热...     

影响油罐电位的输油参数分析

目前,油库、储运公司改扩建工程较多,不可避免对工艺流程进行调整,依据液体静电产生原理,应用高斯定理和欧姆定律等理论,分析油罐注油过程中油面电位以及时间与管径、流速等各参数之间的关系,针对管径不变流速变化的情况,进行实验分析,在不对管路进行整改,仅对泵进行重新设计优选时,对如何控制罐内电位的安全,提出参考方案,对油库改扩建工程有一定的指导意义。